Build Score Summary: The 26-inch Gold wire wheels dramatically reshape the stance of the 1973 Caprice while the 275/25R26 low-profile tire keeps the overall tire diameter manageable for a 26-inch package. The standard 26×9 configuration is particularly attractive for owners who want the donk appearance without shortening the rear end or converting the vehicle for a deep-dish rear setup.
Customer Feedback
“Ninja Tire did a great job reshaping my Caprice. Love the setup. Definitely referring more friends to Ninja Tire.”
— James Pearson
26-Inch Wire Wheels on a 1973 Chevrolet Caprice
The 1973 Chevrolet Caprice has the large body, long wheelbase, and substantial wheel openings that make it one of the classic platforms associated with larger donk-style wheels.
James Pearson’s four-door Caprice uses 26-inch Gold knock-off wire wheels, combining the visual impact of a large donk wheel with the traditional character of a classic wire-wheel design.
The key to making a setup like this work is choosing the correct wheel width and offset.
For customers who want a relatively straightforward 26-inch installation, we recommend:
26×9 Standard Offset
This configuration gives the Caprice a full 26-inch donk appearance without requiring the rear-end modifications associated with an aggressive deep-dish setup.
26×9 Standard Offset — No Rear-End Shortening Required
This is the most important fitment point for the page.
A correctly specified 26×9 standard-offset wire wheel with 275/25R26 tires can be used on this Caprice without shortening the rear end.
That makes the standard 26×9 configuration the best choice for someone who wants the large-wheel appearance while keeping the vehicle much closer to its existing configuration.
The standard setup offers:
- Full 26-inch donk appearance
- 26×9 wheel width
- More manageable inner and outer clearance
- No rear-end shortening
- No deep-dish conversion required
- Much simpler installation than a 26×10 deep-rear setup
- Balanced front and rear wheel appearance
For most customers wanting a clean, practical 26-inch Caprice setup, 26×9 standard offset is the configuration I would recommend.
What If You Want a Deep-Dish Rear Wheel?
Some customers want a more aggressive staggered appearance with a visibly deeper rear lip.
For that look, the setup changes to something such as:
26×9 Front + 26×10 Deep-Dish Rear
The wider 26×10 rear wheel pushes much farther inward and/or outward depending on the wheel specifications.
That additional width and deep-dish geometry requires more space than the factory rear-end configuration normally provides.
As a result, a true deep-dish rear setup generally requires:
Shortening the rear end, along with other minor clearance modifications necessary for the wider rear wheels and tires.
This is not the same type of installation as the standard 26×9 package.
26×9 Standard vs. 26×10 Deep Rear
| Fitment | 26×9 Standard | 26×10 Deep-Dish Rear |
|---|---|---|
| Look | Clean 26-inch donk | Aggressive staggered donk |
| Rear Lip | Standard | Much deeper |
| Wheel Width | 9″ | 10″ rear |
| Rear-End Shortening | Not required | Required |
| Additional Modifications | Generally none for correct standard fitment | Minor clearance work typically required |
| Installation Complexity | Lower | Higher |
| Best For | Easy, balanced 26-inch setup | Maximum deep-dish appearance |
| Our Recommendation | Best choice for most builds | Custom/advanced build |
Why a 26×10 Rear Requires More Work
Wheel width is only part of the issue.
A 26×10 deep-dish rear wheel is specifically designed to create a much larger visible lip. To accomplish that, the wheel geometry moves the inner wheel position significantly compared with a standard-offset 26×9.
On a classic Caprice, there simply may not be enough space to achieve that look while retaining the original rear-end width.
Shortening the rear end provides the additional space needed to move the wheels inward and maintain the desired deep-lip position under the rear quarters.
Depending on the exact build, additional minor adjustments may also be necessary around the wheel opening, suspension, or other clearance points.
So the choice is really:
Want 26s with minimal modification? Choose 26×9 standard.
Want the dramatic deep-dish staggered rear look? Choose 26×10 rear and plan for rear-end shortening and additional fitment work.
275/25R26 Custom Whitewall & Gold Stripe Tires
James’ wheels are paired with 275/25R26 custom Whitewall & Gold Stripe Tires.
Approximate tire dimensions:
| Tire Specification | 275/25R26 |
|---|---|
| Section Width | 275 mm |
| Sidewall Height | ≈ 2.7″ |
| Wheel Diameter | 26″ |
| Overall Diameter | ≈ 31.4″ |
The short 25-series sidewall allows the vehicle to run a very large 26-inch wheel without adding an excessively tall tire around it.
That is why the 275/25R26 is such a strong choice for this type of donk setup.
Why 275/25R26 Works Well With 26×9
The 275/25R26 provides enough width to visually match the large wheel while maintaining a relatively low profile.
Combined with a 26×9 standard-offset wheel, it creates the full 26-inch appearance customers want without requiring the aggressive wheel geometry of a 26×10 deep-dish rear.
This combination gives the Caprice:
26-inch visual impact
Wide 275-series tire
Low-profile sidewall
Balanced standard-offset fitment
No rear-end shortening
Gold Knock-Off Wire Wheel Style
The Gold finish gives this Caprice a much more distinctive luxury-donk appearance than a conventional chrome setup.
The knock-off center retains the traditional character of a classic wire wheel, while the oversized 26-inch diameter transforms it into a modern donk application.
The result combines two different custom-car influences:
Traditional Knock-Off Wire Wheels + Modern Donk Sizing
That is one of the reasons this setup stands out.
Custom Whitewall & Gold Stripe
The tire styling is equally important.
The custom whitewall creates a strong bright border around the Gold wheel, while the Gold Stripe visually ties the tire back into the wheel finish.
The complete package becomes:
26×9 Gold Wire Wheels + 275/25R26 Whitewall & Gold Stripe Tires
The combination looks intentionally designed as one package rather than simply putting large wheels on a classic Caprice.
Why This Setup Works on the 1973 Chevrolet Caprice
The full-size body of the 1973 Caprice is capable of visually carrying a 26-inch wheel exceptionally well.
The 26×9 standard configuration gives the vehicle the large donk stance without requiring the more complicated rear-end work associated with a 26×10 deep-dish setup.
The Gold wire-wheel finish adds luxury character, the knock-off design maintains classic styling, and the custom 275/25R26 whitewall and gold-stripe tire completes the transformation.
Build Highlights & Fitment Notes
| Build Highlights | Fitment & Ownership Notes |
|---|---|
| 26×9 Gold wire wheels | Standard 26×9 does not require rear-end shortening |
| Standard-offset configuration | Correct vehicle-specific wheel specs remain important |
| Knock-off wire-wheel design | Professional installation recommended |
| 275/25R26 custom tires | Overall diameter is approximately 31.4″ |
| Whitewall + Gold Stripe | Maintain proper tire pressure |
| Donk-ready appearance | Inspect knock-off hardware regularly |
| No-mod standard setup | 26×10 deep rear requires additional work |
| Optional staggered deep-dish look | Shortened rear end required for deep 26×10 rear |
Looking for 26-Inch Wire Wheels for a Chevrolet Caprice?
Ninja Tire offers 26-inch wire wheels, custom whitewall tires, and complete wheel-and-tire packages for classic Chevrolet Caprice builds, from clean standard-offset setups to aggressive staggered deep-dish configurations.
For most Caprice owners, a 26×9 standard-offset setup is the recommended choice when the goal is to run 26-inch wheels without shortening the rear end. When properly specified for the vehicle, this configuration delivers the full donk appearance while keeping installation considerably simpler than a deep-dish staggered build.
For customers wanting a more aggressive stance and a much deeper rear lip, a 26×10 deep-dish rear setup can be custom built. This configuration requires shortening the rear end along with additional minor clearance modifications to accommodate the wider rear wheels properly.
Explore more related Ninja Tire options:









