Build Score Summary: The 22×8 All Gold 150-spoke wire wheels create a bold luxury-custom appearance on the 1977 Cutlass Supreme, while the 245/30R22 low-profile tire keeps the overall package considerably more manageable than a taller 265/35R22 setup. The 24K California Gold finish and custom whitewalls give the build a distinctive premium look without sacrificing the classic character of the Cutlass.
22×8 All Gold Wire Wheels on a 1977 Cutlass Supreme
The 1977 Oldsmobile Cutlass Supreme has the long coupe proportions and classic luxury styling needed to visually carry a larger custom wheel.
Edward Sartin Jr.’s Cutlass uses 22×8 standard 150-spoke wire wheels, creating significantly more wheel presence while retaining traditional wire-wheel detail.
The standard configuration is important because it keeps the wheel position more controlled than an aggressive reverse or deep-dish setup, which becomes increasingly important as wheel diameter increases.
Real 24K California Gold Finish
One of the defining features of this build is the All Gold finish with real 24K California Gold plating.
The gold treatment covers the visible wheel design rather than being limited to only a center section, giving the 150-spoke pattern a highly distinctive appearance.
I would consistently describe these as:
Real 24K California Gold-Plated Wire Wheels
rather than simply “24K gold wheels,” so customers clearly understand that the wheels feature a premium gold-plated finish rather than being made from solid gold.
The complete combination is:
22×8 Standard All Gold 150-Spoke Wire Wheels
245/30R22 Custom Whitewall Tires
Why 245/30R22 Is the Best Choice for This Cutlass
The tire profile is critical when installing a 22-inch wheel on a classic Cutlass Supreme.
A 245/30R22 gives the car the full visual impact of a 22-inch wheel while keeping the overall outside diameter relatively compact.
Approximate tire dimensions:
| Specification | 245/30R22 | 265/35R22 |
|---|---|---|
| Section Width | 245 mm | 265 mm |
| Sidewall Height | ≈ 2.89″ | ≈ 3.65″ |
| Overall Diameter | ≈ 27.8″ | ≈ 29.3″ |
| Diameter Difference | — | ≈ 1.52″ taller |
| Radius Difference | — | ≈ 0.76″ closer to the fender |
| Width Difference | — | ≈ 0.79″ wider |
| Fitment Character | Lower profile / more clearance | Taller, wider / significantly tighter clearance |
That is a substantial difference.
Why 265/35R22 Is Too Large for a No-Mod Cutlass Setup
The 265/35R22 is approximately 29.3 inches tall, compared with only about 27.8 inches for the 245/30R22.
That means the 265/35R22 is approximately:
1.52 inches taller overall
and roughly:
0.79 inch wider.
Because half of that diameter difference sits above the wheel center, the taller tire places the tread approximately 0.76 inch closer to the upper wheel opening and fender.
On a classic Cutlass Supreme, three-quarters of an inch of lost vertical clearance is significant.
The additional width also reduces clearance around:
inner wheel wells, suspension components, outer fenders, and steering areas.
For this reason, a 265/35R22 is not the recommended tire for a standard no-modification 22×8 Cutlass Supreme setup.
To run the larger 265/35R22, the vehicle will generally need additional clearance through increased ride height, suspension changes, fender modification, or a combination of fitment adjustments, depending on the individual car.
Why the 245/30R22 Works Better
The lower-profile 245/30R22 solves several of those issues.
Its advantages include:
- Approximately 1.52″ smaller overall diameter than 265/35R22
- Approximately 0.76″ more vertical tire-to-fender clearance
- Approximately 20 mm narrower section width
- More room around the inner wheel well
- More clearance during suspension movement
- Lower likelihood of tire-to-fender interference
- Stronger visual emphasis on the 22-inch wheel
- Cleaner low-profile custom appearance
That makes the 245/30R22 the much better option for a customer who wants 22-inch wire wheels without turning the Cutlass into a lifted or heavily modified fitment project.
245/30R22 vs. 265/35R22 — Which Should You Choose?
245/30R22
Choose the 245/30R22 when the priority is:
maximum clearance with a 22-inch wheel.
It provides the lower overall diameter needed for a cleaner standard-height build and is the configuration we would favor for this type of Cutlass Supreme setup.
Approximate Overall Diameter: 27.8″
265/35R22
Choose the 265/35R22 only when you specifically want a much fuller tire and are prepared to address the additional clearance requirements.
The larger tire creates noticeably more sidewall and a taller overall package.
Approximate Overall Diameter: 29.3″
That additional size means the vehicle may require:
additional ride height, fender clearance work, suspension adjustments, or other modifications.
For a standard-height 1977 Cutlass Supreme, the 245/30R22 is the better fitment choice.
Why Tire Profile Matters More Than Wheel Diameter Alone
A common mistake is assuming that two tires designed for the same 22-inch wheel will fit similarly.
They do not.
The wheel may be the same diameter, but the tire sidewall determines the final outside diameter of the entire wheel-and-tire package.
With the 245/30R22:
22-inch wheel + short 30-series sidewall = approximately 27.8-inch overall diameter
With the 265/35R22:
22-inch wheel + taller 35-series sidewall = approximately 29.3-inch overall diameter
That 1.52-inch difference can completely change whether the tire clears the fender and suspension on a classic vehicle.
Custom Whitewall Tires
Edward’s All Gold wire wheels are paired with 245/30R22 custom Whitewall Tires.
The custom whitewall gives the low-profile tire a more traditional luxury appearance and helps visually connect the modern 22-inch wheel diameter with the classic styling of the Cutlass Supreme.
The combination creates:
22×8 All Gold Wire Wheels + 245/30R22 Custom Whitewall Tires
The whitewall also provides strong contrast against the 24K California Gold finish, making the wheel stand out even more.
Why This Setup Works on the 1977 Oldsmobile Cutlass Supreme
Several elements make Edward’s setup work particularly well:
- 22×8 sizing gives the Cutlass a bold custom stance
- Standard configuration maintains a cleaner wheel position
- 150-spoke design preserves traditional wire-wheel styling
- Real 24K California Gold plating creates a premium finish
- 245/30R22 sizing keeps overall tire diameter around 27.8 inches
- Lower tire profile provides substantially more fender clearance
- 245 width provides more room than a 265-series tire
- Custom whitewall keeps the setup connected to classic luxury styling
Build Highlights & Fitment Notes
| Build Highlights | Fitment & Ownership Notes |
|---|---|
| 22×8 standard wire wheels | Vehicle-specific fitment should still be verified |
| All Gold finish | Wheel offset and backspacing affect final clearance |
| Real 24K California Gold plating | Use non-abrasive cleaners on plated surfaces |
| Dense 150-spoke design | Suspension condition affects available clearance |
| 245/30R22 custom whitewalls | Approx. 27.8″ overall diameter |
| Lower-profile fitment | Provides significantly more clearance than 265/35R22 |
| Classic luxury appearance | Brake and steering clearance should be checked |
| Strong no-modification-oriented tire choice | Professional installation recommended |
Important Cutlass Fitment Note
For a 1977 Cutlass Supreme running 22×8 standard wheels, the 245/30R22 is the fitment-oriented tire size I would recommend when maintaining clearance is the priority.
The larger 265/35R22 is approximately 1.52 inches taller and 0.79 inch wider and is generally too large for the same standard-height, no-modification approach.
If a customer specifically wants to use 265/35R22 tires, additional ride height and/or fender-clearance work should be expected.
Individual vehicles can still vary because of suspension condition, ride height, alignment, brake components, body tolerances, and previous modifications, so final fitment should always be verified.
Looking for 22-Inch Wire Wheels for an Oldsmobile Cutlass Supreme?
Ninja Tire offers 22-inch wire wheels, Gold wire wheels, custom whitewall tires, and complete wheel-and-tire packages for classic Oldsmobile Cutlass Supreme builds.
For customers wanting to run 22×8 standard wire wheels without adding unnecessary tire height, the 245/30R22 is the recommended fitment-oriented option. Its approximately 27.8-inch overall diameter provides considerably more wheel-well clearance than a 265/35R22.
The 265/35R22 measures approximately 29.3 inches tall and is nearly 0.8 inch wider, making it much more likely to require increased ride height or fender modifications on a classic Cutlass.
Explore related Ninja Tire options:









