Zenith 13×7 Reverse Chrome 100-Spoke Wire Wheels & Whitewall Tires Set

Zenith 13×7 Reverse Chrome 100-Spoke Wire Wheels with 155/80R13 Whitewall Tires

Build a timeless lowrider setup with this complete Zenith 13×7 reverse chrome 100-spoke wire wheel and 155/80R13 true whitewall tire package. The combination of bright chrome, classic 100-spoke construction, a deep reverse stance and premium ShowTime engraved Zenith hubs creates the traditional wire-wheel appearance that continues to define classic lowrider styling.

The 13×7 reverse configuration gives the wheel a wider, deeper appearance than a standard 13-inch setup, while the included 155/80R13 custom true whitewall tires preserve the fuller sidewall profile traditionally associated with 13-inch lowrider wheels.

At the center of each wheel, the ShowTime engraved Zenith hub adds a distinctive finishing detail that separates this package from a basic chrome 100-spoke wheel. Complete wheel-and-tire packages are professionally mounted, balanced and quality-checked by Ninja Tire before shipment.

💎 Zenith 100-Spoke Chrome Wire Wheel Design

The Zenith 100-spoke wire wheel delivers the dense spoke-filled appearance that has become one of the most recognizable looks in traditional lowrider wheel styling.

The bright chrome finish emphasizes the individual spokes and gives the wheel additional visual depth as light reflects across the center and outer rim.

The 100-spoke configuration is especially attractive for customers who want a fuller wheel center than lower-spoke-count designs while preserving a clean and traditional chrome appearance.

👑 ShowTime Engraved Zenith Hub

One of the most distinctive features of this package is the ShowTime engraved Zenith hub design.

Rather than using a plain center hub, the Zenith engraving adds additional detail to the center of the wheel and gives the setup a more premium show-quality presentation.

The engraved hub becomes a focal point when the wheel is viewed up close and complements the dense chrome 100-spoke pattern around it.

📐 13×7 Reverse Fitment for a Deep Lowrider Stance

This wheel uses a 13×7 reverse configuration, creating the deeper outer appearance traditionally associated with aggressive lowrider wheel setups.

Compared with a standard-offset wheel, reverse fitment places more of the wheel toward the exterior of the vehicle, producing a stronger outward stance and more pronounced outer lip.

A 13×7 reverse setup is especially attractive when:

• You want a traditional deep-dish lowrider appearance.
• You want more wheel presence than a narrower 13-inch setup.
• You prefer a stronger outward stance.
• You are building a hydraulic or show-oriented classic.
• You want traditional 13-inch lowrider proportions.

Because reverse wheels can sit farther outward, fender, suspension and brake clearance should always be confirmed for the exact vehicle before ordering.

Explore additional aggressive configurations in our reverse wire wheels collection.

✨ Bright Chrome Finish

The complete wheel is finished in bright reflective chrome, creating the clean classic appearance traditionally associated with premium wire wheels.

Chrome works especially well with a 100-spoke design because the numerous spoke surfaces reflect light from different angles, making the wheel appear more detailed as the vehicle moves.

The chrome finish also creates strong contrast against the white sidewall of the included tires.

⚪ 155/80R13 Custom True Whitewall Tires

This package includes 155/80R13 custom true whitewall tires, providing the fuller tire sidewall profile that complements traditional 13-inch wire wheel styling.

The 155/80R13 size maintains substantial visible sidewall around the compact 13-inch wheel instead of creating the ultra-low-profile appearance associated with larger modern wheel packages.

This helps preserve the proportions traditionally associated with lowriders, hydraulic builds and classic American custom cars.

The true whitewall also creates a clean visual frame around the bright chrome wheel, allowing the Zenith 100-spoke design and engraved hub to remain the focal points.

Browse additional sizes and custom sidewall options in our custom true whitewall tires collection.

Why 155/80R13 Works with 13×7 Wire Wheels

With traditional lowrider setups, tire profile plays an important role in the overall appearance of the wheel package.

The 155/80R13 maintains a tall sidewall relative to the 13-inch wheel diameter, creating the classic relationship between wheel, tire and whitewall that customers expect from a traditional lowrider build.

The final tire shape and vehicle clearance should still be checked according to the specific tire construction, suspension setup and wheel position.

13×7 Reverse vs Standard 13-Inch Wire Wheels

Two 13-inch wire wheels can sit very differently on the same vehicle depending on their width and offset configuration.

A standard wheel generally provides a more neutral position with less outward poke.

A 13×7 reverse wheel is designed to create a deeper outer lip and stronger outward stance.

If the traditional deep-dish lowrider appearance is the priority, reverse fitment provides the more aggressive look. If fender clearance and a more tucked wheel position are more important, a standard configuration may be more appropriate.

Need Help Choosing the Right 13-Inch Wire Wheel Setup?

If you are comparing different 13-inch widths, offsets or tire sizes, read our complete 13-inch wire wheel fitment guide for additional information on reverse vs standard fitment, tire sizing, wheel poke, hydraulics and vehicle clearance.

13×7 Zenith Wire Wheels for Traditional Lowriders

Thirteen-inch wire wheels remain one of the most recognizable wheel sizes in traditional lowrider culture. Their compact diameter leaves enough visible tire sidewall to create the classic whitewall appearance while allowing reverse wheel fitment to create a deeper stance.

Depending on the exact vehicle, suspension, brakes and available clearance, 13×7 reverse wire wheels may be considered for traditional builds based on vehicles such as:

• Chevrolet Impala
• Chevrolet Monte Carlo
• Chevrolet Caprice
• Buick Regal
• Oldsmobile Cutlass
• Cadillac classics
• Chevrolet Bel Air
• other classic American lowrider platforms

Vehicle-specific fitment should always be confirmed because different generations can have different wheel openings, brake systems, suspension geometry and hub configurations.

Hydraulics & Lowered Vehicle Clearance

13×7 reverse wire wheels are commonly selected for traditional lowrider builds equipped with hydraulics or lowered suspension, but changing ride height makes clearance especially important.

Wheel and tire clearance should be checked at:

• normal driving height
• lowest intended ride height
• full steering lock
• compressed suspension positions

A setup that clears while the vehicle is parked can still make contact as the suspension moves or the front wheels turn.

Reverse Offset & Wheel Poke

Because this wheel uses a reverse configuration, it is intended to create a stronger outward stance than a standard wheel.

The exact amount of wheel poke depends on more than the 13×7 dimensions alone. Final wheel position can also be affected by:

• offset
• backspacing
• adapter configuration
• vehicle track width
• hub position
• tire dimensions
• suspension setup
• fender clearance

Customers who want a tucked stance should consider whether standard fitment is more appropriate before ordering a reverse setup.

Classic Chrome Wire Wheels with Whitewall Tires

The combination of chrome wire wheels and true whitewall tires remains one of the most timeless custom-car looks.

The white sidewall visually frames the reflective chrome wheel while the 100-spoke center provides the intricate detail associated with traditional lowrider builds.

The engraved Zenith hub adds a distinctive center detail without taking away from the clean chrome-and-whitewall presentation.

Built for a Complete Zenith ShowTime Appearance

This complete package combines several classic lowrider design elements:

• 13×7 reverse wheel sizing
• Zenith branding
• 100-spoke construction
• bright chrome finish
• ShowTime engraved Zenith hubs
• 155/80R13 custom true whitewall tires

Together, these details create a traditional chrome lowrider package designed for customers who want a recognizable classic look with a more detailed premium hub design.

Complete Zenith 13×7 Wire Wheel & Whitewall Tire Package

The complete set includes:

• (4) Zenith 13×7 Reverse Chrome Wire Wheels
• 100-Spoke Construction
• Bright Chrome Finish
• ShowTime Engraved Zenith Hub Design
• (4) 155/80R13 Custom True Whitewall Tires
• Professional Mounting & Balancing
• Ninja Tire Quality Check Before Shipment

Product Specifications

Wheel Brand / Style	Zenith
Wheel Size	13×7
Tire Size	155/80R13
Tire Style	Custom True Whitewall
Spoke Count	100 Spoke
Finish	Chrome
Fitment / Offset Style	Reverse
Hub Design	ShowTime Engraved Zenith Hub
Condition	Brand New
Package Quantity	Complete Set of 4

🇺🇸 Professionally Assembled & Checked by Ninja Tire

Complete wheel and tire packages are professionally mounted, balanced and quality-checked by Ninja Tire before shipment. Wheel finish, hub presentation, tire condition and overall package quality are inspected before shipment.

Fitment Verification Before Ordering

Before ordering, provide your vehicle year, make and model so the appropriate fitment can be confirmed.

For a 13×7 reverse setup, fitment should account for:

• bolt pattern and mounting configuration
• front and rear brake clearance
• current wheel and tire size
• suspension height
• hydraulics or air suspension
• fender clearance
• desired wheel poke
• existing brake or suspension modifications

Contact Ninja Tire if you are unsure whether this Zenith 13×7 reverse chrome 100-spoke wire wheel and 155/80R13 true whitewall tire package is appropriate for your vehicle.

Frequently Asked Questions